Panasonic RAMSA WR-DA7 - Manual (Page 51)

3 - 9
11.New method or controlling the Surround LR/FR Position in Jog &
Fader mode
Previous Versions: Adjustments to the Surround Left-Right Position are
controlled using the JOG dial. Surround Front-Rear Position is controlled
using the MASTER LR FADER.
Version 2.0: Along with the above operations, adjustments to surround Left-
Right Position can be performed by using the PAN knob and adjustments for
the Surround Front-Rear Position by using the upper knob in the DYNAMICS
Section.
12. New method for controlling Surround Sub
Previous Versions: To make adjustments to the Surround Sub send level,
you could only adjust it from within the [SEND VOL] Surround Mode.
Version 2.0: The Surround Sub level can now be adjusted in all of the
Surround modes.
13. New feature allows communication with Digital Audio Workstations
(DAW) in the MIDI Remote window
Previous Versions: This mode was not implemented.
Version 2.0: From the [UTILITY>USER CSTM] window, you can now select
the DAW MODE. Once you have selected the [DAW] button, you can use the
Custom/MIDI Layer to control a Digital Audio Workstation from the Top Panel
of the DA7. Many DAWs, such as ProTools, are controllable from an external
MIDI controller.
In order to make this DAW MODE compatible with as many Digital Audio
Workstations as possible, we have implemented a MIDI protocol that
conforms to the JL Cooper CS-10 Workstation Controller. To configure the
DAW MODE to work properly with your DAW, you should consult the
operation manual of your workstation for the configuration of your system.