Panasonic RAMSA WR-DA7 User Manual
Page 54
3 - 1 2
14. New feature allows the routing of Inputs to an assignable Input
Matrix
Previous Versions: The Audio Input signals were pre-assigned to the Faders.
Version 2.0: The Audio Input signals can now be re-assigned (in-groups of
eight channels) to a Fader within its group. This is a new window. It is called
[INPUT MTX] and is located in the [UTILITY] window group.
Move the Cursor to the channel area, and the desired INPUT box. Select the
desired Audio Channel by using the JOG dial. The INPUT box will appear in
inverse video. Then, press ENTER button. If you press the [DEFAULT] button,
the INPUT box area will change to its normal assignments for each FADER.
CAUTION: This window should be checked immediately after you upgrade the
console. Because this is a new feature, it is possible for the Input Channels to
be assigned randomly. If they are incorrect, simply press the default button in
each section to return to normal operation. You will only need to do this when
you upgrade.
[UTILITY>INPUT MTX] window