Panasonic KX-FC238HK - Manual (Page 53)

7. Copy
51
7 Copy Copying
7.1 Making a copy
1 Adjust the width of the document guides ( 1)
to fit the actual size of the document.
2 Insert the document (up to 10 pages) FACE
DOWN until a single beep is heard and the
unit grasps the document.
L If the document guides are not adjusted
to fit the document, re-adjust them.
3 If necessary, press {A} or {B} repeatedly to
select the desired resolution.
4 Press {COPY}.
L If necessary, enter the number of copies
(up to 30).
5 Press {START}, or wait for 15 seconds.
L The unit will start copying.
Note:
L Any document which can be sent as a fax can
also be copied (page 40).
To select the resolution
Select the desired resolution according to the
type of document.
–
“ FINE”: For printed or typewritten
documents with small print.
– “ SUPER FINE”: For documents with very
small print.
– “ PHOTO”: For documents containing
photographs, shaded drawings, etc.
L If you select “ STANDARD”, copying will be
done using “ FINE” mode.
Quick scan feature
This feature is helpful when you want to copy the
document, then remove it for other uses. To use
this feature, activate feature #34 (page 60)
beforehand. The default setting is OFF.
L The document will be fed into the unit and
scanned into memory. The unit will then print
the data.
If the document exceeds the memory
capacity, copying of the exceeded document
will be cancelled and this feature will be
turned OFF automatically.
However this feature will not turn OFF
automatically when:
–
you enter the number of copies, and
memory becomes full during copying.
– memory becomes full during enlarge,
reduce or collate copy.
To stop copying
Press {STOP}.
7.1.1 More copying features
To enlarge a document
1. Insert the document, then press {COPY}.
2. Press {>}.
3. Press {A} repeatedly to select “ 150%” or
“ 200%”, then press {START}.
L The unit will only enlarge the centre of the
upper part of the document. To make an
enlarged copy of the bottom of the
document, turn the document around,
and then make a copy.
Example: 150% enlarged copy
To reduce a document
1. Insert the document, then press {COPY}.
2. Press {>}.
3. Press {B} repeatedly to select “ 92%”, “86%”
or “ 72%”, then press {START}.
1
{ COPY}
{ START}
{ STOP}
{>}{A}{B}
Original document Enlarged copy
A B
C D
A B
C D
FC238HK-PFQX2217ZA_en.book Page 51 Wednesday, July 27, 2005 11:02 AM