Panasonic KX-FC238HK - Manual (Page 65)

9. Programmable Features
63
Note:
L The ECM setting (feature #68 on page 62)
will not be reset.
9.4 Direct commands for
programming features
You can also select the desired setting by directly
entering the program code (# and a 2-digit
number) and direct command.
For more details on the features, see page 59 to
page 62.
1 Press {MENU}.
2 Press {#} and the 2-digit code number.
3 Press the desired direct command to display
the desired setting.
L This step may be slightly different
depending on the feature.
4 Press {SET}.
5 To exit programming, press {MENU}.
9.4.1 Program code and direct
command button
{#}{ 0}{1} Date and time
L Enter the date and time using the dial
keypad. See page 24 for details.
{#}{ 0}{2} Your logo
L Enter your logo using the dial keypad. See
page 25 for details.
{#}{ 0}{3} Your fax number
L Enter your fax number using the dial keypad.
See page 26 for details.
{#}{ 0}{4} Sending report
– { 1}: “ ON”
– { 2}: “ OFF”
– { 3}: “ ERROR” (default)
{#}{ 0}{6} FAX ring count
– { 2}: “ 2” (default)
– { 3}: “ 3”
– { 4}: “ 4”
– { 5}: “ 5”
– { 6}: “ 6”
– { 7}: “ 7”
– { 8}: “ 8”
– { 9}: “ 9”
{#}{ 0}{6} TAM ring count
– { 2}: “ 2” (default)
– { 3}: “ 3”
– { 4}: “ 4”
– { 5}: “ TOLL SAVER”
FC238HK-PFQX2217ZA_en.book Page 63 Wednesday, July 27, 2005 11:02 AM