Remote operation, 4 operating from a remote location, Operating from a remote location – Panasonic KX-FC238HK User Manual

Page 58: 4 operating from a remote location, 1 summary of remote operation, 2 remote operation using remote commands, Answering machine 56

Advertising
background image

8. Answering Machine

56

Remote Operation

8.4 Operating from a remote location

You can call your unit from a remote location and access the answering machine.

Important:

L

Program the remote operation ID beforehand (feature #11 on page 59).

L

Set the unit to TAM/FAX mode before going out (page 47).

L

Use a touch tone telephone for remote operations.

Helpful hints:

L

When you press a key, press firmly.

L

Please make a copy of the following table, and carry it with you when you go out.

8.4.1 Summary of remote
operation

1

Call your unit.

2

During the TAM/FAX greeting message,
enter the remote operation ID.

3

When there are new recorded messages

1. A long beep will sound.

2. Short beep(s) will sound up to 8 times.

L

This indicates the number of new
messages.

3. New messages will be played back.

When there are no new messages

1. A long beep will sound (short beep will

not sound).

2. Press {5}.

3. All the recorded messages will be played

back.

4

To end remote operation, hang up.

Note:

L

When the voice memory is full, 6 beeps will
sound after playing back the recorded
messages. Erase any unnecessary
messages.

8.4.2 Remote operation using
remote commands

{

1} Repeat (During playback)

L

The current message is repeated.

L

If pressed within 5 seconds of playback, the
previous message will be played.

{

2} Skip (During playback)

L

The current message is skipped. The next
message is played.

{

4} New message playback

L

New messages are played back.

{

5} All message playback

L

All messages are played back.

{

7} Record greeting message

L

Speak after the long beep and press {9} to
stop the operation.

{

9} Stop

L

Recording of the greeting message is
stopped.

{*}{

4} Erase a specific message (During

playback)

L

The current message is erased and the next
message will be played.

{*}{

5} Erase all messages

L

All recorded messages are erased.

Answering machine remote operation

1. Call your unit.

2. Enter the remote operation ID during or after

the TAM/FAX greeting message.

3. Enter a remote command within 10 seconds.

{

5}

Plays all messages

{

7}

Records greeting message

{

9}

Stops recording of the greeting
message

Key

Remote command

{*}{

4}

Erases a specific message

{

1}

Repeats a message

{*}{

5}

Erases all messages

{

2}

Skips a message

{

0}

Skips the greeting message

{

4}

Plays new messages

{

8}{0}

Turns OFF auto answer setting

FC238HK-PFQX2217ZA_en.book Page 56 Wednesday, July 27, 2005 11:02 AM

Advertising