Philips SJ/T113632006 - Manual (Page 9)

9
Note
The voltage and power rating information is •
located on the bottom of the unit.
Set time and date
1
Dock the iPod / iPhone on the unit.
2
Open the iPod / iPhone.
Time and date information on the »
iPod / iPhone transfers to the unit
automatically.
To set time and date manually:
1
In standby mode, press and hold DATE •
AUTO TUNE/TIME SET for 2 seconds.
[24 HR] begins to blink. »
2
PressTUNING +/- or / to select
12/24 hour format.
3
Press DATE • AUTO TUNE/TIME SET
to confirm.
The hour digits begin to blink. »
4
Press TUNING +/- or / to set the
hour.
5
Press DATE • AUTO TUNE/TIME SETto
confirm.
The minute digits begin to blink. »
6
Repeat steps 4-5 to set the minute, year,
month, and day.
3 Get started
Caution
Use of controls or adjustments or •
performance of procedures other than herein
may result in hazardous radiation exposure or
other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
bottom of the apparatus. Write the numbers
here:
Model No. __________________________
Serial No. ___________________________
Connect power
Caution
Risk of product damage! Ensure that the power •
voltage corresponds to the voltage printed on
the back or underside of the apparatus.
Risk of electric shock! When you unplug the •
AC adaptor, always pull the plug from the
socket. Never pull the cord.
Before connecting the AC adaptor, ensure you •
have completed all other connections.
1
Connect one end of the AC adaptor to
the DC IN socket on the main unit.
2
Connect the other end of the AC
adaptor to the wall outlet.
English
EN
DC220_93_UM_V1.0.indb 9 2010-4-9 9:43:24