1 troubleshooting, Troubleshooting – Panasonic KX-TDA30 User Manual

Page 188

Advertising
background image

4.1 Troubleshooting

188

User Manual

4.1

Troubleshooting

4.1.1

Troubleshooting

Troubleshooting

Problem

Remedy

The telephone does not work properly.

•

Consult your dealer.

I cannot use the telephone.

•

The telephone is locked.

Unlock your telephone. (

1.5.3 Preventing Other

People from Using Your Telephone (Extension Lock), 2.1.1
Extension Control)

•

Your telephone is connected to an eXtra Device Port.

System programming is required. Consult your dealer.

Some features do not work.

•

System management may restrict certain features.

Consult your manager.

•

The feature numbers have changed.

Confirm the revised number and try again.

Even though following the manual
instructions, none of the operations
work when using a proprietary
telephone.

•

The Intercom line was not seized. The seized line, when

going off-hook, was changed by personal setting. (

3.1.2 Settings on the Programming Mode)

In the manual, going off-hook means an Intercom line

is seized.

If the setting has been changed, press the INTERCOM
button after going off-hook and follow the instructions.

The parallelled single line telephones do
not ring.

•

"No ring" may be selected.

Change the setting to ring. (

1.7.11 Setting the

Parallelled Telephone to Ring (Parallelled Telephone))

The telephone does not work using the
personal settings or with other settings.
(One-touch dialling, forwarding
destination, etc.)

•

The extension line has been changed. The previous
telephone's settings have not been cleared.

Clear the settings and then programme your desired

settings again. (

1.7.13 Clearing Features Set at Your

Extension (Extension Feature Clear), 3.1.1 Customising
Your Phone (Personal Programming)
, 3.1.3 Customising
the Buttons
)

My proprietary telephone does not have
a feature button.

•

Some models do not have the feature button.

Change a flexible button to the desired button. (

3.1.3 Customising the Buttons)

Enter the specified feature number instead of the

feature button. (

1.1.1 Before Operating the

Telephones)

Advertising