Panasonic KX-TDA30 - Manual (Page 26)

1.2 Making Calls
26 User Manual
To call with one touch
Using an Account Code (Account Code Entry)
You may give a specified account code to extension users and check their telephone usage. You can specify
an account code for each client and check the call duration.
• To start monitoring another PBX extension after customising an NDSS button, go off-
hook, press the NDSS button, and go on-hook.
The NDSS button light will show the current status as follows:
Off: The extension is idle.
Red on: The extension is busy.
Customising Your Phone
• 3.1.3 Customising the Buttons
Create or edit a Network Direct Station Selection (NDSS) button.
• A Panasonic proprietary telephone extension user can enter an account code during a
conversation and when hearing reorder tone after the other party hangs up.
• Account codes may use the digits "0" through "9".
• If you enter the wrong code, press the " " key and re-enter the account code.
PT and SLT PT/PS
Off-hook. Press NDSS . Talk.
(NDSS)
PT/SLT/PS
Enter # . Off-hook.
account code
Enter account code
(max. 10 digits).
Press Account or
enter 49 .
Dial outside
phone number .
outside
phone no.
Seize outside line before
entering outside phone number.
OR
9 4
(Account)
D.Tone