Safety and maintenance (see 6 ) – Philips AJ3916CD User Manual

Page 10

Advertising
background image

Safety and general
maintenance

If you do not intend to use the CD clock
radio for a long time, withdraw the power
cord from the wall outlet.

Place the set on a hard and flat surface so
that the system does not tilt.

Do not expose the set, batteries, CDs to
humidity, rain, sand or excessive heat caused
by heating equipment or direct sunlight.

No objects filled with liquids, such as vases,
shall be placed on the appartus.

No naked flame sources, such as lighted
candles, should be placed on the apparatus.

Do not cover the set. Adequate ventilation
with a minimum gap of 6 inches between the
ventilation holes and surrounding surfaces is
necessary to prevent heat build-up.

The mechanical parts of the set contain
self-lubricating bearings and must not be oiled
or lubricated.

To clean the set, use a soft dry cloth. Do not
use any cleaning agents containing alcohol,
ammonia, benzene or abrasives as these may
harm the housing.

Mains powered equipment not exposed to
dripping or splashing

The main plug is a disconnect device, it shall
remain readily operable.

CD player and CD handling

The lens of the CD player should never be
touched!

Sudden changes in the surrounding tempera-
ture can cause condensation to form and the
lens of your CD player to cloud over. Playing
a CD is then not possible. Do not attempt to
clean the lens but leave the set in a warm
environment until the moisture evaporates.

Always shut the CD door to keep the CD
compartment dust-free.To clean, dust the
compartment with a soft dry cloth.

To clean the CD, wipe in a straight line from
the center towards the edge using a soft,
lint-free cloth. Do not use cleaning agents as
they may damage the disc.

Never write on a CD or attach any stickers
to it.

Safety and maintenance (See

6 )

Advertising