Philips VR670B/58 - Manual (Page 15)

11
CLOCK
YEAR è 2001 p
MONTH 01
DATE 01
TIME 20:00
SMART CLOCK ON
________________________________
EXITpMENU
STOREpOK
6
Check the year in line 'YEAR'. If required, please change the year with
the number buttons 0-9 on the remote control.
7
Select the next line with P ;q or P =r .
8
Check if the displayed settings for 'MONTH', 'DATE' and 'TIME' are
correct.
9
When all information is correct, save by pressing OK . 'STORED' will
briefly flash in the video recorder display.
The initial installation is now complete.
Satellite receiver
If you are connecting a satellite receiver, please read the section 'Using the
satellite receiver'.
Decoder
If you are connecting a decoder, you must install it as described in the next
section.
aSound disruptions can occur on several TV channels
b If sound disruptions should occur for several saved TV channels or there is
no sound at all, it is possible that the incorrect TV system was saved for
this TV channel. In the chapter 'Manual TV channel search' you will find the
information on how to change the TV system.
Decoder allocation
Some TV channels transmit encoded TV signals which can only be viewed with a commercially
purchased or hired decoder without disturbances. You can connect such a decoder
(descrambler) to this video recorder. The following function will automatically activate the
connected decoder for the desired TV channel.
1
Switch the TV on. If applicable, select the programme number for the
video recorder operation.
2
Use the buttons P ;q , P =r on the video recorder or the
number buttons 0-9 on the remote control to select the TV channel
which you would like to allocate the decoder to.
3
Press the button MENU on the remote control. The main menu will
appear.
4
Use the buttons P ;q or P =r to select the line 'MANUAL
SEARCH' and confirm with OK .
ENGLISH
Installing your video recording