Philips VR670B/58 - Manual (Page 16)

12
MANUAL SEARCH
PROGRAMME NUMBER è P01 p
S-CHANNEL NO
CHANNEL NUMBER 21
DECODER OFF
NICAM ON
TV SYSTEM AUTO
________________________________
EXITpMENU
STOREpOK
5
Use the buttons P =r or P ;q to select the line 'DECODER'.
6
Use the buttons QSr or SqP to select 'ON' (Decoder
switched on).
How can I switch off the decoder?
Use the button SqP on the screen to select 'OFF' (Decoder switched
off).
7
Confirm with OK .
8
End with the button MENU .
BBC1 The decoder has now been allocated to this TV channel.
If this TV channel is chosen, the symbol 'DEC' will appear in the video recorder display.
Manual TV channel search
In some cases it could occur that all of the TV channels were not found and saved during the
initial installation. In this case, the missing or coded TV channels must be searched for and
stored manually.
1
Switch on the TV set. If required, select the programme number for
the video recorder.
2
Press MENU on the remote control.
The main menu will appear.
3
Select line 'MANUAL SEARCH' using P =r or P ;q and confirm
with OK .
MANUAL SEARCH
PROGRAMME NUMBER è P01 p
S-CHANNEL NO
CHANNEL NUMBER 21
DECODER OFF
NICAM ON
TV SYSTEM AUTO
________________________________
EXITpMENU
STOREpOK
4
Select line 'PROGRAMME NUMBER' using P =r or P ;q .
5
Using QSr or SqP , select the desired programme number
that you want to use for the TV channel, e.g. 'P01'.
6
In line 'S-CHANNEL', select the desired display using SqP .
Installing your video recording