Precor Strength-Training Fitness Equiptment S3-19 - Manual (Page 25)

S3.19 Assembly and Maintenance Guide
page 25
1 2 3 4 5 6
Step 10. Install Mid Pulley Cable and Hi/Lo Pulley Connection, continued
E. Disassemble the Single Floating Pulley attached to
the Leg Press Option Cable 130211 and feed the
Mid Pulley Cable around the disassembled pulley.
Reattach the pulley to the floating pulley housing
using
one 2-inch zinc hex head bolt
two zinc washers
one thin zinc locknut
Wrench tighten.
F. Disassemble the lower portion of the Double
Floating Pulley. Feed the cable around the lower
pulley and reattach it using
one 2-inch zinc hex head bolt
two zinc flat washers
one zinc locknut
Wrench tighten.
G. Feed the threaded end of the cable underneath the
pulley inside the Pivoting Bracket attached to the
Main Base.
H. Align the Pivoting Bracket with the base frame
bracket on the Hi/Lo Pulley Assembly.
F
E
Double Floating Pulley
Assembly
1 - 2" zinc bolt
2 - zinc washers
1 - zinc locknut
Pivoting
Bracket
G H
Single Floating
Pulley
1 - 2" zinc bolt
2 - zinc washers
1 - zinc locknut