Precor Strength-Training Fitness Equiptment S3-19 User Manual
Page 31
S3.19 Assembly and Maintenance Guide
page 31
1
2
3
4
5
6
4
Cable Adjustments
and Maintenance
Cable Adjustments and Maintenance
When the S3.19 is completely assembled, you need to
check the cables for proper tension. Obvious signs that
cable problems exist include:
✔ Top Cap Weight does not rest squarely on the top
weight of the Weight Stack.
✔ Cables rub the inside edges of the pulleys.
✔ Excess slack exists in the cables.
✔ Weight Pin cannot be easily inserted in or removed
from each hole in the Weight Stack.
✔ Selector Stem rubs inside the Weight Stack.
CAUTION: Take the time to perform the following
steps. If the cables do not have the proper tension
you could void the Precor Limited Warranty.
Important: To access the cables attached to the
Selector Stem and two Floating Pulleys, you will need
to remove the shrouds.