Philips Laserfax LPF 5120 - Manual (Page 12)

12 Philips · Laserfax 5120 · 5125 · 5135
EN
2 Remove the toner cartridge by gripping the handle in
the middle and pulling it forwards out of the device
3 Remove the tape and protective paper, but do not
remove the protective strip from the car-
tridge yet
.
4 Shake the new toner cartridge back and forth several
times in order to distribute the toner evenly, thereby
improving the print quality.
5 Only after completely pull off the protection strip
located on the left side of the cartridge.
6 Place the toner cartridge into your device. The cartridge
should snap securely into position.
7 Close the device.
Remove the Packaging Material
from the Paper Tray
1 Pull the paper tray out of the device.
DANGER!
Escaping Toner Dust!
Never open a toner cartridge. If toner dust is
released into the air, you should avoid allow-
ing it to contact your skin and eyes. Do not
inhale the released toner dust. Remove the
toner dust from clothing or objects with cold
water; hot water would only cause the toner
to set. Never remove loose toner dust with a
vacuum cleaner.
DANGER!
Escaping Toner Dust!
Once you have removed the protection strip,
do not shake the toner cartridge any more.
Otherwise, it is possible that toner dust will
be released into the air.
CAUTION!
Toner Cartridge Not Inserted Cor-
rectly!
If the device cover would not close, the toner
cartridge is not inserted correctly. Take the
toner cartridge out and insert it again cor-
rectly.
EX B5 B5
A5
B6
A4
lpf-5120-5125-5135-manual-uk-int-253117544-b.book Seite 12 Mittwoch, 16. Dezember 2009 10:01 10