Patton electronic 6511RC - Manual (Page 61)

Using a browser to complete Model 6511RC configuration 61
Model 6511RC User Manual 3 • Configuring the Matrix Switch for operation
The mapping path you select will determine which parameter fields the 6511RC will display on the DS0 Map-
ping Overview page. You have already selected an SDH mapping type, but you may wish to double-check this
value before mapping any DS0s, by doing the following:
1. On the 6511RC Configuration Menu (see figure 27 on page 48), click the SDH hyperlink to open the SDH
overview page (see figure 44 ).
Figure 44. SDH Overview page
2. At the top of the SDH Overview page, click the Configuration hyperlink to open the SDH Modify page (see
figure 45 ).
Figure 45. SDH Modify page