Patton electronic 6511RC - Manual (Page 74)

3 • Configuring the Matrix Switch for operation Model 6511RC User Manual
74 Using a browser to complete Model 6511RC configuration
9. Click the Define button.
10. Verify your new mapping appears in the Defined Mappings table.
11. Examine the new mapping to ensure it was entered and recorded correctly.
You have completed the configuration for example 3.
Saving your configuration
At this point you have completed the basic configuration of your Matrix Switch for operation. To save your
configuration settings in non-volatile RAM, do the following:
1. On the 6511RC Configuration Menu (see figure 27 on page 48), click the HOME hyperlink to open the
6511RC Web Management Home page (see figure 56 ).
Figure 56. 6511RC Home page
2. Under Operator Actions Click the Record Current Configuration button (see figure 56 ).
Note All configuration settings will be lost unless you click on the
Record Current Configuration button before you power down
or reset the Matrix Switch.