Installation – Panasonic AW-PH400P User Manual
Page 18
Indoor Pan/Tilt Head AW-PH400
18
Installation
(Be sure to ask your dealer to install the unit.)
$
Attaching the wire
The wire is not provided. Use one which is strong enough to bear the weight of the whole camera (camera + lens).
When mounting the cameras with fan (AW-E655, AW-E750, AW-E800, AW-E800A)
1
Use the wire mounting screw (M4
!
8 mm with flat washer and spring washer) to attach one end of the wire to the pan/tilt
head’s arm.
2
Mount the mounting spacer on the top panel of the camera.
3
Use the wire mounting screw (M4
!
6 mm with flat washer and spring washer) to attach the other end of the wire to the screw
hole of the mounting spacer.
When mounting the cameras without fan (AW-E350, AW-E650, AW-E300, AW-E300A, AW-E600)
1
Use the wire mounting screw (M4
!
8 mm with flat washer and spring washer) to attach one end of the wire to the pan/tilt
head’s arm.
2
Use the wire mounting screw (M4
!
6 mm with flat washer and spring washer) to attach the other end of the wire to the screw
hole of the top panel of the camera.
❈
Be absolutely sure to tighten up the mounting spacer and screws securely using a tool such as a screwdriver.
For a stand-alone installation
For installation on the ceiling
≥
Camera: AW-E750
≥
Camera: AW-E750
≥
Camera: AW-E650, AW-E350
≥
Camera: AW-E650, AW-E350
M4
!
6 mm wire
mounting screw
with flat washer
and spring washer
M4
!
6 mm wire mounting
screw with flat washer and
spring washer
M4
!
8 mm wire
mounting screw
with flat washer
and spring washer
M4
!
8 mm wire mounting
screw with flat washer and
spring washer
Mounting
spacer
(supplied with
AW-E750)
Mounting spacer
(supplied with
AW-E750)
Wire
Arm