Panasonic AW-PH400P - Manual (Page 34)

Pan/Tilt Control Panel AW-RP400
34
How to change the position of the connector panel
The position of the connector panel can be changed from the rear panel to the bottom panel.
1 Remove the five bottom panel screws, and remove the
blank panel.
2 Remove the five rear panel screws, and remove the
connector panel.
5 Secure the connector panel to the bottom panel using the
screws.
3 Secure the blank panel to the rear panel using the
screws.
4 Remove the two rubber feet from the blank panel.
Screws ! 5 (bottom panel)
Screws ! 5
(rear panel)
Screws ! 5 (bottom panel)
Screws ! 5
(rear panel)
Remove the blank
panel.
Remove the
connector panel.
Remove the two
rubber feet.
Connector panel
Blank panel
❈ Before changing the position, turn off the power.