Panasonic AW-PH400P - Manual (Page 42)

Cable Compensation Unit AW-RC400
42
Specifications
Input connectors
DC 12V IN: For connecting optional accessory AC adaptor (AW-PS301)
G/L IN: BNC ! 2, automatically terminated by 75-ohm resistance, loop-through output, black burst
VIDEO/Y, Pr/C, Pb: BNC ! 3 (5 sets), 75-ohm termination
Composite
Y/C
Component (Y/Pr/Pb)
MONI SEL IN: RJ45
Connecting cable: 10BASE-T straight cable (UTP category 5), max. 50 meters
Output connectors
G/L OUT: BNC ! 5, 75-ohm output, BELDEN 8281 connecting cable, max. 1000 meters
VIDEO/Y, Pr/C, Pb: BNC ! 3 (5 sets), 75-ohm output
Composite
Y/C
Component (Y/Pr/Pb)
(Cable compensation adjustment is required)
MONITOR OUT1/2: BNC ! 3 (2 sets), 75-ohm output
Switch and adjustment functions: Power ON/OFF; cable length setting 0/1/2/3/4/5; sync signal setting SHORT/LONG; cable
compensation amount adjustment; video level adjustment
Ambient operating temperature: 14°F to 113°F (–10°C to +45°C)
Storage temperature: –4°F to 140°F (–20°C to +60°C)
Ambient operating humidity: 30% to 90% (no condensation)
Dimensions (W ! H ! D): 16-9/16” ! 3-7/16” ! 9-13/16” (420 ! 88 ! 250 mm)
Weight: Approx. 8.2 lbs (3.7 kg)
Finish: AV ivory paint (color resembling Munsell 7.9Y6.8/0.8)
Weight and Dimensions indicated above are approximate.
Specifications are subject to change without notice.
Supply voltage: DC 12.0 V
Power consumption: Approx. 9 W
1
indicates safety information.