Plantronics CS55 Series - Manual (Page 6)

6 Plantronics CS55 Setup Guide
C
ONNECT
P
OWER AND
C
HARGE
H
EADSET
3
STE
P
1 . Plug the Base Power Adapter into a wall outlet, then plug the power cord into the YELLOW
labeled connector on the bottom of the Headset Base. The RED Power light on the left
front of the Headset Base will turn on. (See illustration at bottom of page.)
Power
(R ED )
Charge
Status
(
AMBER )
Insert into YELLOW labeled power
connection on Headset Base as
shown to charge.
Headset Base
(bottom view)
Base
Power
Adapter
A. Connect Headset Base to power outlet
1 . Gently push the headset into the charging cradle as shown below. The AMBER Charge Status
light on the base will fl ash to indicate the headset battery is charging. A solid light indicates
full charge. A full charge will take approximately 3 hours.
B. Charge the Headset for at least 20 Minutes before using