Plantronics CS55 Series - Manual (Page 9)

9 Questions? For fast, efficient Technical Support call: 800-544-4660 Ext. 5538
Press Call
Control Button
5. If you do not hear a dial tone, the Lifter may not be raising the handset high enough OR the
Confi guration Dial may need adjusting. Continue to step 6.
6 . Check the Lifter height adjustment by moving the Lifter Height Switch to a
higher position. Repeat steps 2 through 4 as necessary.
If you hear a dial tone, the lifter height is now set correctly. Please continue with
the next section “Mount the Lifter in Permanent Position”.
7 . If you still cannot hear a dial tone, you will need to change the setting
on the Confi guration Dial. Using a coin or paperclip, turn the Confi guration
Dial to a diff erent setting until you hear a dial tone.
To view an interactive quick start guide online,
visit www.plantronics.com/CS55.
Confi guration
Dial
Position Indicator
1 . Remove the protective strips from the three mounting tapes on the underside of the Lifter.
2 . GENTLY place the Lifter on the desk phone in the optimum position as determined above.
Test the Lifter to verify positioning by pressing the Call Control Button on your headset to
activate the Lifter and listen for a dial tone.
3 . Press FIRMLY to adhere the Lifter to the desk phone.
C. Mount the Lifter in permanent position
Multiple settings might work with your phone; however, only one is the
optimal position.
4. Press the Call Control Button on the headset. This will activate the Handset Lifter
and lift the handset from the phone.
If you hear a dial tone, the lifter height is set correctly and
needs no adjustment. Please continue with the next
section “Mount the Lifter in permanent position”
on the following page.
If you still cannot hear a dial tone, please call Technical Support at 800-544-4660
Extension 5538.