Patton electronic IM2RC/F User Manual
Page 3
2.0 GENERAL INFORMATION
Thank you for your purchase of this Patton Electronics product.
This product has been thoroughly inspected and tested and is
warranted for One Year parts and labor. If any questions arise during
installation or use of this product, please contact Patton Electronics
Technical Support at: (301) 975-1007.
2.1 FEATURES
• Designed for use with Patton Electronics short range modem
access products that receive Patton’s Rear Card modules and
support 64k/128k synchronous data rates
• Compliant with ITU-T G.703 electrical specifications
• 120 ohm RJ-45 Network Termination
• Complies with ITU-T G.823 Jitter Control Specifications
• Supports Clear Channel or Octet Timing Modes
• Built-in Transformer Isolation and Surge Protection
• Supports Network or Modem Timing
• Fits in Patton’s 2u (3.5”) rack chassis and cluster boxes
• Made in the U.S.A.
2.2 DESCRIPTION
The Patton Model IM2RC/F
is a rack-mountable rear card that
provides Patton baseband modems with an interface to the G.703
PCM network. With the IM2RC/F you can achieve high speed G.703
network extension, dedicated high speed internet access, remote LAN
access,...the possibilites are endless! Supporting 64 kbps clear
channel or 128 kbps octet mode data streams, the IM2RC/F can set its
own clock or it take clocking from the G.703 network.
The Model IM2RC/F meets baseband modem function cards such
as 1092ARC, 1045RC and 2500RC in the mid-plane of Patton’s 2U
(3.5”) rack chassis. G.703 access is accomplished via a 120 Ohm RJ-
45 jack. 2 or 4 Wire twisted pair Line connections are made via a
second RJ-45 jack.
The Model IM2RC/F features on-board transformer isolation and
surge protection as well as compliance with ITU-T G.823 Jitter Control
Specifications.
4
1.2 CE NOTICE
The CE symbol on your Patton Electronics equipment indicates
that it is in compliance with the Electromagnetic Compatibility (EMC)
directive and the Low Voltage Directive (LVD) of the Union European
(EU). A Certificate of Compliance is available by contacting Technical
Support.
1.3 SERVICE
All warranty and non-warranty repairs must be returned freight
prepaid and insured to Patton Electronics. All returns must have a
Return Materials Authorization number on the outside of the shipping
container. This number may be obtained from Patton Electronics
Technical Services at:
Telephone:
(301) 975-1007;
Web Address:
http://www.patton.com;
email:
NOTE:
Packages received without an RMA number will not be
accepted.
Patton Electronics' technical staff is also available to answer any
questions that might arise concerning the installation or use of your
Model IM2RC/F.
Technical Service hours: 8AM to 5PM EST, Monday
through Friday.
3