Playing back, Playing discs, Press [ í , dvd power] to turn the unit on – Panasonic DMR-E100H User Manual

Page 18: Press [hdd] or [dvd] to select the playback drive, Press [ 1 ] (play)

Advertising
background image

18

RQT6986

Pl

a

y

in

g ba

c

k

Playing discs

[HDD]

[RAM]

[DVD-R]

[DVD-A]

[DVD-V]

[VCD]

[CD]

[MP3]

1

Press [

Í

, DVD POWER] to turn the

unit on.

2

Press [HDD] or [DVD] to select the
playback drive.

The HDD or DVD button lights up on the unit.

It is not possible to playback both HDD (Hard Disk Drive)
and DVD drive simultaneously.

3

If you selected the DVD drive

Press [

<

OPEN/CLOSE] to open the

tray and insert a disc (

page 14).

Press the button again to close the tray.

If cartridge protection is activated (

page 10), play begins

automatically when you close the tray.

[RAM]

You cannot play continuously from one side of a double-
sided disc to the other. Eject the disc and turn it over.

If you put a disc in while the HDD is selected, the DVD but-
ton on the unit will flash while the unit reads the disc.

4

Press [

1

] (PLAY).

The unit takes some time to read the disc
before play starts. (When a menu screen
appears on the television

next page)

Play starts from the most recently recorded program.

[HDD]

[RAM]

[DVD-R]

Play starts from the beginning of the disc.

[DVD-A]

[DVD-V]

[VCD]

[CD]

[MP3]

To stop play
Press [

].

Resume play function
When “PLAY” flashes on the display, resume
function is active. Press [

1

] (PLAY) to start play

from where you stopped it.
To cancel, press [

] until “PLAY” goes out. (The position is also

cleared when you turn the unit off or open the disc tray.)

The screen saver may appear when you
stop play. Press [

] again and you can

use this unit’s tuner to watch television.

To pause play
Press [

;

]. (Press again to restart play.)

Auto power-off

The unit switches to standby after about 6 hours in the stop mode.
You can turn this feature off or change the time to 2 hours
(

page 51, Set Up—Off Timer).

[Note]

If you select another drive while playback is in progress, playback
will be stopped. If using DVD-Video, the contents of the menu
screen may be returned to their initial state.

If a disc is loaded, the unit will come on and play will start when
you press [

1

] (PLAY).

When you play a disc with an audio-only track, the video from the
previous disc may continue to be shown on the television.

Actual sound levels for DVD-Video are lower compared to televi-
sion broadcast or playback of other discs. To avoid a sudden
increase in volume level when switching from DVD-Video, reduce
the volume setting before playing other sources or switching to
television broadcast.

When using this unit for the first time, the HDD has nothing
recorded on it. You must record a program etc to the HDD before
you can enjoy playback.

;

:

,

9

?

POSITION

MEMORY

DIRECT

NAVIGATOR,

TOP MENU

ERASE

MENU

RETURN

3

,

4

,

2

,

1

ENTER

DVD, TV

4

HDD

DVD

2

1

3

DUBBING

REC

HDD

DVD

REC

4

,

5

ERASE

1

3

4

?

2

Disc tray

Numbered

buttons

PLAY

DVD-RA

PLAY

DVD-RA

Advertising