Panasonic DMR-E100H - Manual (Page 23)

23
RQT6986
Pl
a
y
in
g ba
c
k
To display still pictures one by one
Press [
3 , 4 , 2 , 1 ] to select a still picture and then [ENTER].
To select the next or previous still picture
While in the still picture display, press [
2 , 1 ].
[ 2 ] : previous still picture [ 1 ] : next still picture
≥ The still picture changes every time the button is pressed.
To return to the previous screen
Press [RETURN].
5
Press [ 3 , 4 ] to select “Slide Show”
and press [ENTER].
The still pictures in the folder appear in numerical order.
To change the display timing
1 After step 2 on the left page, press [ 3 , 4 ] to select “Settings”
and press [ENTER].
2 Press [ 3 , 4 ] to select “Slide Show”.
3 Press [ 2 , 1 ] to select the desired timing between still pictures
(0 – 30 seconds) (in base units of 1 second).
4 Press [ENTER].
To select the next or previous still picture
While in still picture display, press [
2 , 1 ].
[ 2 ] : previous still picture [ 1 ] : next still picture
≥ The still picture changes every time the button is pressed.
To return to the previous screen
Press [RETURN].
5
Press [ 3 , 4 ] to select “Play” and
press [ENTER].
Displayed icons
: Programs that
cannot be played
: Programs without
audio
6
Press [ 3 , 4 ] to select a program and
press [ENTER].
≥ To select with the numbered buttons:
e.g., “5”: [0] ➜ [0] ➜ [5] “15”: [0] ➜ [1] ➜ [5]
To return to the previous screen
Press [RETURN].
To stop
Press [
∫ ].
To pause
Press [
; ].
To skip programs
Press [
: ] or [ 9 ].
To skip a minute forward
Press [CM SKIP].
To search the point to play
Press [
6 ] or [ 5 ] during play (3 steps). (Play pauses and only
the displayed time advances.)
Press [
1 ] (PLAY) to restart play.
To display the on-screen display
Press [STATUS].
[Note]
≥ Video on this unit’s display is expanded to fit an aspect ratio of
(320
k 240) dots and may be different from the aspect ratio of the
original video or may cause the edges of the video to be cut off.
≥ The recorded date and time display may be different.
To display still pictures one by one with constant
interval (Slide Show)
To play SD VIDEO (MPEG4) programs
RETURN
0 - - 9
No.
SD VIDEO
(MPEG4)
002 12/31
No. CH DATE TITLE EDIT
3
3
START
5:00 PM
001 11:00 AM 12/24
SD Card
ENTER
SELECT
Dinosaur
Auto action
4
2 1
1
1
1
1
e.g., SD Card
To erase a still picture or a SD VIDEO (MPEG4) program
(Still pictures and programs are erased irretrievably by this pro-
cedure.)
During play or while in still picture display
1 Press [ERASE].
2 Press [ 2 , 1 ] to select “Erase” and press [ENTER].
To rotate the still picture
While in still picture display
1 Press [ENTER].
2 Press [ 3 , 4 ] to select “Rotate RIGHT” or “Rotate LEFT” and
press [ENTER].
≥ The still picture as a whole is rotated.
≥ Rotation information will not be stored.
To display information about the still pictures
While in still picture display, press [ENTER].
(Date, “folder number” - “file number” and number of still pictures
are displayed.)
To give a title to a still picture folder
After selecting the still picture’s folder in step 4 on the left page,
press [
1 ] to select “Folder Title” and press [ENTER].
( ➜ page 46, Entering text):
≥ Titles inputted using this unit will not be displayed on other
equipment.
Folder structure
The following
can be displayed on this unit.
e.g.,
§ Folders can be created on other equipment. However, these
folders cannot be selected as a copy destination.
≥ The folder cannot be displayed if the numbers are all “0” (e.g.,
DCIM000
etc).
≥ Files and folders that were created on equipment other than
this unit may not display properly or play.
XXXXXXXX.JPG
XXXXXXXX.TIF
Press [ : , 9 ] to change between folders.
Press [ : , 9 ] to change between folders.
Card
IM ¢¢ CDPF or IMEXPORT
DCIM (Still picture folder)
¢¢¢ XXXXX
DCIM ¢¢¢ (Still picture folder)
DVD-
RAM
JPEG
¢¢¢ : Numbers XXX : Letters
XXXXXXXX.JPG
XXXXXXXX.TIF
XXXXXXXX.JPG
XXXXXXXX.TIF
¢¢¢ XXXXX
DCIM
SD VIDEO (SD VIDEO folder)
XXXXXXXX.JPG
XXXXXXXX.TIF
§
§
¢¢¢ XXXXX
MOL ¢¢¢ .ASF
PRL ¢¢¢ (MPEG4 folder)
SD VIDEO (SD VIDEO folder)
MOL ¢¢¢ .ASF
PRL ¢¢¢ (MPEG4 folder)
MOV ¢¢¢ .MOI
MOV ¢¢¢ .MOD
PRG ¢¢¢ .PGI
PRG ¢¢¢ (MPEG2 folder)
MGRINFO (MPEG2 control
information folder)