Panasonic DMR-E100H - Manual (Page 28)

28
RQT6986
Timer recor
d
ing
Timer recording
[HDD]
If you record a program onto HDD repeatedly everyday or every
week using timer recording, the unit will record the new program
over the old one.
1
While the timer recording list ( ➜ page 27, step 4) is displayed
Press [ 3 , 4 ] to select the program
and then [ENTER].
2
Press [ 2 , 1 ] to select
“RENEW”.
3
Press [ 3 , 4 ] to select “ON” and then
[ENTER].
The timer recording list reappears.
[Note]
≥ If a program set for Auto Renewal Recording is protected, the program
will not be overwritten. Instead the program set for recording will be
saved as a separate program, and this program will be the one to be
overwritten when the next Auto Renewal Recording takes place.
≥ When play back is taking place from the HDD, auto renewal
recording will not be carried out. The program supposed to be auto
renewal recorded will be recorded as a separate program.
≥ Play list scenes made from programs that were set for Auto
Renewal Recording are erased along with auto renewal.
≥ When there is not enough space on the HDD, the program may not
be recorded completely (even if repeating a renewal recording).
[HDD] [RAM] [DVD-R]
1
Press [PROG/CHECK].
Icon explanations
W The times overlap those in another program.
Note the following if times overlap:
–The program with the earlier start time receives priority.
Recording of the program with the later start time starts when
the earlier program finishes recording.
–If you make two programs with the same start time, the one
you programmed last receives priority.
- You stopped recording of a weekly or daily timer recording. The
icon disappears the next time the timer starts recording.
¥ This program is currently recording.
F The disc was full or the maximum number of programs or
scenes was reached so the program failed to record.
The material was copy-prohibited so it was not recorded.
X The program did not complete recording because the disc is
dirty or some other reason.
≥ Programs that failed to record are displayed gray. They are auto-
matically deleted from the timer recording list at 4 a.m. two days
later.
Auto Renewal Recording indicator [HDD]
The program will be automatically recorded over in succession.
Relief Recording indicator
Programs that have been rerouted to the HDD because of
insufficient space.
Recording drive indicator
HDD
DVD
Message displayed in the CHECK line
Some of the information shown in the CHECK line may not be cor-
rect while you are recording.
Enable: Displayed if the recording can fit in the remaining space
on the disc.
> (Date): For recordings made daily or weekly, the display will
show as long as recordings can be made (up to a maxi-
mum of one month from the present time) based on the
time remaining on the disc.
! : It may not be possible to record because of write protec-
tion, because there is no more space left or because the
number of possible programs has reached its maximum.
Please check the HDD and disc.
2
Press [PROG/CHECK] or [RETURN].
The timer recording list disappears.
Auto Renewal Recording
This function can be used only when weekly recording or
daily recording is selected for “DATE”.
≥ You cannot set if “MPEG4 Rec mode” ( ➜ page 52) is set to
either “SF”, “F”, “N”, or “E”.
DVD TV
INPUT SELECT VCR Plus+ OPEN/CLOSE TV/VIDEO
CH
VOLUME
SKIP
DIRECT NAVIGATOR PLAY LIST
TOP MENU
ENTER
MENU
FUNCTIONS RETURN
STOP PAUSE PLAY/x1.3
SLOW/SEARCH
CANCEL
1 2 3
DVD TV
4 5 6
7 8 9
0 100
FRAME CM SKIP TIME SLIP
ERASE REC PROG/CHECK ADD/DLT
DUBBING REC MODE STATUS MARKER
AUDIO SETUP DISPLAY POSITION
MEMORY
POWER
3 , 4 , 2 , 1
ENTER
PROG/CHECK
CANCEL
RETURN
ADD/DLT
HDD DVD
Numbered
buttons
SP --> 6/11 2:00 PM 1:00 PM 64 ABC WEEKLY TUE 01
MODE DRIVE CHECK OFF ON No CHANNEL DATE
1:42 SP
TIMER
New Timer Program
TIMER
RECORDING
Remain HDD DVD
3/26 TUE12:55 PM
SP Enable 3:00 PM 2:30 PM 64 ABC 3/ 26 TUE 02
17:36 SP
SP ON
MODE DRIVE RENEW
HDD
Check programs
CANCEL
TIMER
RECORDING
RETURN
SELECT
MODE DRIVE CHECK OFF ON No CHANNEL DATE
3/26 TUE 12:55 PM
ENTER
Press ENTER or VCR Plus+ to
store new program.
1:42 SP Remain HDD DVD 17:36 SP
New Timer Program
W 02
03
04
05 64 ABC
64 ABC SUN-SAT
3/ 25 MON
2:30 PM
2:30 PM 2:40 PM
3:30 PM
10:00 AM
9:00 AM
LP
SP
W
# 3/31
Overlap
LP Enable 1:22 PM 1:19 PM 64 ABC 3/ 26 TUE 01
11:00 AM 07
06 F
X
64 ABC
64 ABC
64 ABC 3/ 26 TUE
3/ 26 TUE
3/ 26 TUE 9:00 AM
8:00 AM
10:00 AM
SP
SP
SP
64 ABC WEEKLY MON 5:00 AM 6:00 AM # 3/28 - LP