Recording from a video cassette recorder – Panasonic TC 22LR30 User Manual

Page 43

Advertising
background image

43

Disc / Card Operation

2

Press

▲▼ to select the time and press ENTER.

• The time indicator will go off after about 5 seconds, but will turn on

again when you set the indicator.

• Press ▲▼ to alter in 1-minute units. Press and hold ▲▼ to alter in

10-minute units.

To stop play

Press STOP.

To stop recording

Press STOP. Wait 2 seconds, press STOP again.

To stop timer recording

Press STOP. Wait 2 seconds, hold down STOP for a few

seconds.

-5 min

PLAY

REC

To show the play images in full

Press TIME SLIP.
• Press TIME SLIP to return to the picture-in-picture screen.

Note:

• The image on the small screen may be distorted or flicker depending on

the scene. However, this does not affect the image recorded.

Recording from a video cassette
recorder

Preparation

• Connect a video cassette recorder to this unit’s input terminals.

Notes:

• When recording using this unit’s input terminals, only the sound received

at the time of recording will be recorded. As long as secondary audio that
is recorded on the video cassette is not output on the unit in play, it is not
recorded.

• Recording cannot be done when input is Component or HDMI.

e.g., Connecting the L2 input terminals

To skip unwanted parts

Press PAUSE to pause recording. (Press again to restart

recording.)

To stop recording

Press STOP.

Almost all videos and DVD software on sale have been

treated to prevent illegal copying. Any software that has

been so treated cannot be recorded using this unit.

This unit

VIDEO

S VIDEO

IN

AUDIO

R

L

If the audio output of the other equipment is monaural, connect to

L/MONO.

* The S-VIDEO terminal achieves a more vivid picture than the VIDEO

terminal.

Other video equipment

Audio/Video cable

1

Press INPUT to select the input channel for the

equipment you have connected in Stop mode.

2

Press REC MODE to select the recording mode (XP,

SP, LP or EP).

• Using Flexible Recording (p. 39), you can save content of a video

cassette to 1 disc with the best possible quality of recording without
wasting disc space.

3

Start play on the other equipment.

4

Press

REC.

• Recording starts.

Yellow

S-Video cable*

DVD-R

RAM

Red

White

• When appears on the screen while a button is being pressed, it means that the corresponding operation is prohibited by

the unit or the disc.

Advertising