General, Monitor position adjustment, Tilt angle/front-rear position – Panasonic CQ-VD7200U User Manual

Page 8: Display open/close, Power, Mode, Volume, Mute, Loudness, Tilt

Advertising
background image

DVD/VCD(Video CD)/

CD/MP3

POW

ER

P·MODE

TRACK/

CHANNEL

VOLUME

MENU

MUTE

MODE

NAVI

NAVIGA

TION

ASPECT

OPEN/CLOSE

ASP

ENTER

TILT

IN-DASH 7 INCH WIDE COLOR LCD TV / DVD - VIDEO / RECEIVER

CQ-VD7200U

DISC

POW

ER

MUTE

MODE

Cautions:
¡For smooth adjustment, make sure to first return the lateral angle to the neutral position and then adjust the tilt angle.
¡Avoid physical shock on the monitor.

Caution: Do not interfere with the movement of the monitor. Do not change
the position of the unit forcibly.

Caution: There is the danger of your fingers being pinched if you hold the
unit by the lower part. Hold the unit by the upper half, and move it carefully
without applying undue force.

Caution: Do not place any object on the display unit, or subject it to undue
force.

Monitor Position Adjustment

Tilt Angle/Front-Rear Position

POWER

VOLUME

MENU

MUTE

MODE

NAVI

NAV

IGAT

ION

ENTE

R

TILT

P.MODE

ASP

ASPECT

CQ-V

AD7

300U

IN-DASH 7 INCH WIDE COLOR LCD TV / DVD - VIDEO / RECEIVER

DISC

Press and hold [TILT] on the display unit for more than 1 second.

Press [}], [{], []] or [[] to adjust.
The setup is the same way as the one from MENU. Refer to
“SET-UP : User Settings” for details. (

a

page 38)

Display Unit Lateral Angle Adjustment

Folding Down the Display Temporarily

Hold the display unit by the non-slip part on the upper half of it, and adjust its
lateral angle.

Fold Down: press [TILT] on the display unit.
Raise: press [TILT] again on the display unit.

Note: Even when the unit is off, you can fold down the display temporarily.

2

TILT

[TILT]

Notes:
¡Vertical angle (TILT) and front-rear position data are saved in the memory, so

when the display unit is drawn out next, it is automatically set at the angle and
in the position adjusted before.

¡After adjusting its angle, also adjust the brightness to make it easy for you to

watch. (

a

page 44)

¡The car model and installation condition may impose some restrictions on the

adjustment of the monitor's angle and position.

1

[}] [{]
[
] ] [[ ]
(Adjust)

[}] [{]
[
] ] [[ ] (Adjust)

View from above

18

19

9

E
N

G

L

I

S
H

10

E
N

G

L

I

S
H

CQ-VD7200U

CQ-VD7200U

Display Open/Close

OPEN

: press [

]

(OPEN/CLOSE).

CLOSE

: press [

]

(OPEN/CLOSE) again.

(After returning the lateral angle to the
neutral position.)

Notes:
¡When the display unit is opened or closed, a loud

beep sounds three times.

¡If the unit stops halfway, press [

]

(OPEN/CLOSE)

again and draw it all the way in.

¡Opening/closing the display can be done when the

power is off.

Power

Turn your car's ignition key to ACC or ON position.
ON: press [MODE] (POWER) on the display unit.

Press [PWR] or [MODE] on the remote control.

OFF: press [MODE] (POWER) again for more than

2 seconds on the display unit.
Press [PWR] again or [MODE] again for more
than 2 seconds on the remote control.

Mode

Press [MODE] to change the mode.

Volume

[}] (VOLUME): up
[{] (VOLUME): down
Setting Range : 0 to 40

Note: The sound level for each source is stored in
memory.

Mute

MUTE ON: press [MUTE].
MUTE OFF: press [MUTE] again.

Loudness

When listening at low or medium volume,
enhance bass and treble tones.
LOUD ON: press and hold [MUTE] for more than 2

seconds.

LOUD OFF: press and hold [MUTE] for more than 2

seconds again.

Warning: Do not touch the unit while the display
is moving. Inserting hands, fingers or foreign
objects into the unit can cause injuries and
damage to the unit.

General

* Selectable only when a CD changer is connected.

[}] [{] (VOLUME)

[MUTE]

[

]

(OPEN/CLOSE)

[MODE] (POWER)

[}] [{]
(VOLUME)

[PWR]
(POWER)

[MUTE]

[MODE]

(

a

page 20)

(

a

page 22)

TV

(

a

page 36)

CH-C

(CD Changer Control)*

(

a

page 34)

AM/FM (Radio)

VTR1

(

a

page 22)

VTR2

(

a

page 24, 28)

Advertising