5 message-based, 6 modem features, 7 noisemargin – Planet Technology IDL-2402 User Manual
Page 357: 8 opmode
- 357 -
5.19.5 message-based
Description
Set minimum DS/US message-based data rate that is needed by
ATU
Syntax
message-based {ds | us} min <number>
Parameter
Name
Description
<number>
Min downstream/upstream message-based
data rate.
Valid values: 4 ~ 28 kbps
Default value: -
Type: Mandatory
5.19.6 modem features
Description Set modem features enable/disable
Syntax
modem features {enable | disable}
Parameter None
5.19.7 noisemargin
Description Set downstream/upstream maximum / minimum / target noise margin
Syntax
noisemargin {ds | us} {max | min | target} <number>
Parameter
Name
Description
<number>
Noise margin value.
Valid values: 0~31 (or 51.1 means no max
noise margin is used) step 0.1.
Default value: -
Type: Mandatory
5.19.8 opmode
Description Set Operational mode
Syntax
opmode {set | clear} <opmode id>
Parameter
Name
Description
opmode id
The ID of allowed ADSL modes of operation.
Valid values: Use ‘list opmode’ command to