Paxar Mobile Work Station (MWS) Monarch 9878 - Manual (Page 17)

A b o u t t h e B a t t e r y C h a r g e r
A cut-out in the left-side panel allows viewing of the charger’s status LEDs.
¨ Store the charger in a dry area not subject to prolonged sub-zero
temperatures.
¨ The battery charger is “intelligent;” it monitors the batteries condition
and does not overcharge the batteries. It is recommended to leave the
battery charger plugged in and charging when the MWS is not in use.
Battery life is extended by frequent charging.
¨ The charger’s Power On light is on when all the connections are correct.
¨ The charger’s Green Full Charge light is on when the battery is finished
charging. Leaving the charger connected to the battery and the charger
plugged in prevents the battery from self-discharging.
I m p o r t a n t B a t t e r y S a f e t y I n f o r m a t i o n
¨ Never smoke or allow a spark or flame in vicinity of battery.
¨ Do Not drop a metal tool on the battery. The resulting spark or
short-circuit on the battery of other electrical part may cause an
explosion.
¨ Remove personal metal items such as rings, bracelets, necklaces, and
watches when working with a lead-acid battery. A lead-acid battery
produces a short-circuit current high enough to weld a ring to metal,
causing a severe burn.
Charging the Batteries
3-3