Paxar Mobile Work Station (MWS) Monarch 9878 User Manual
Page 20
F r e q u e n c y o f C h a r g i n g / R u n - T i m e G u i d e l i n e s
The following information is approximate and should be used for
reference. Many factors effect an individual battery’s performance:
¨
the presence of auxiliary devices.
¨
the printing rate (including printhead contrast and number of labels per
day).
¨
the complexity of your printed formats.
¨
the environment (temperature and humidity in your facility).
In the information below, “typical conditions” are defined as follows:
one Monarch® printer printing standard compliance 4x6 labels (5-10
minutes of actual printing per hour), no auxiliary devices attached to the
MWS, and standard environmental conditions (no excessive heat or
humidity).
¨
When using the 12VDC MWS under typical conditions, the battery may
last up to 20 to 50 hours before recharging is necessary.
¨
When using the 24VDC MWS or the 12VDC converter option under
typical conditions, the batteries may last up to 50 to 100 hours before
recharging is necessary.
¨
When using the 24VDC/115VAC MWS with an AC Power Inverter under
typical conditions, the batteries may last up to 48 hours before
recharging is necessary.
¨
When using the 12VDC/115VAC MWS with an AC Power Inverter under
typical conditions, the batteries may last up to 24 hours before
recharging is necessary.
¨
When you notice the batteries need to be charged more frequently, order
replacement batteries. On 24VDC models, BOTH batteries MUST be
replaced at the same time to maintain capacity match.
3-6 Charging the Batteries