Paxar Mobile Work Station (MWS) Monarch 9878 - Manual (Page 26)

U s i n g t h e R e m o t e S w i t c h
The MWS On/Off switch should be used as a remote switch to turn the
inverter ON or OFF. If ordered with the inverter option, your MWS comes
preset to use the remote switch. However, if you notice the inverter stays
ON all the time, check this setting. The switch may have been bumped
while replacing a battery.
1. Using a 5/32-inch (4 mm) Hex key (wrench), open and remove the lid for
the power cabinet.
2. On the inverter’s front panel, set the ON/OFF/REMO switch to OFF or
REMO (remote).
3. Make sure the switch on the MWS electrical panel is OFF.
4. Using a 5/32-inch (4 mm) Hex key, replace the lid for the power cabinet.
4-4 Power Options
300 Watt Inverter
Set to OFF or REMO