Panasonic SC-HT680 - Manual (Page 25)

25
RQT7969
Ope
ra
ti
n
g othe
r e
quipme
n
t
Operating other equipment
You can use the remote control to operate a Panasonic television or a video cassette recorder. Connect your equipment referring to “Connection
example” (
➜ above).
[Note]
The remote control may not work properly with some models.
Preparation
Aim the remote control at the unit and press [TV] to light up the
button, and then aim it at the television for the following operations:
Turning the television on/off
Press [ Í AV SYSTEM].
Switching the television’s video input mode
Press [SHIFT] i[TV/VIDEO].
Changing channels
Press [ W CH X].
≥[S10/ENTER] is used to confirm channel selection on some
televisions manufactured by other companies.
Adjusting the volume
Press [TV VOL s] or [TV VOLr].
Preparation
≥Change the video input mode on the television (“VIDEO 2” in the
example).
≥Aim the remote control at the unit and press [VCR] to light up the
button, and then aim it at the video cassette recorder for the
following operations:
Turning the video cassette recorder on/off
Press [ Í AV SYSTEM].
Play, pause and stop
Press [ 1] (play), [;] or [∫].
Fast forward and rewind
Press [ 6] or [5].
Connecting a laser disc, tape or record player
Connect instead of a video cassette recorder ( ➜ above) and select
“AUX” as the source.
We recommend using a record player with a built-in phono equalizer.
If your player doesn’t have a built-in equalizer, connect it first to a
separate equalizer and then to the unit.
This remote control can also operate some other brands of
televisions and video cassette recorders. Change the code to
operate such equipment (
➜ back cover).
Aim the remote control at the equipment.
While pressing [TV] or [VCR]
Press a numbered button to enter the first
digit, and then the second digit.
The remote control outputs the on/off signal. If the code is correct,
the equipment turns on or off. If it doesn’t, try entering another code.
[Note]
Reenter the codes after you change the batteries.
AC IN
R L R L
L
R
COMPONENT COMPONENT
VIDEO OUT VIDEO OUT
(480p/480i) (480p/480i)
P R
P B Y
S-VIDEO S-VIDEO
OUT OUT AUX AUX
SUBWOOFER FRONT
FM ANT
75
AM ANT
SPEAKERS
LOOP EXT
CENTER SURROUND
VIDEO VIDEO
OUT OUT
VIDEO OUT AUDIO OUT
R
L
AUDIO OUT
R
L
VIDEO IN
2
1
Television
(not included)
Video cassette recorder
(not included) To show video from the video
cassette recorder
Select “VIDEO 2” input on your
television in this example.
Already connected
(
➜ page 6)
Connect instead of the
television to play audio from
the video cassette recorder
Audio cable
(not included)
Video cable
(not included)
: Signal flow
To play audio from the television
Reduce the volume on the television
to its minimum and control the
volume on this unit.
∫ Connection example
Operating the television and the video cassette recorder
Television
VOLUME
CH
SKIP SLOW/SEARCH
MENU
DIRECT
NAVIGATOR
TOP MENU
RETURN FUNCTIONS
VCR TV
TUNER/BAND DISC
SUBWOOFER LEVEL SUPER SRND C.FOCUS SFC
CD MODE
PLAY MODE
TEST
CH SELECT
SETUP MUTING
MIX 2CH
PL
ZOOM CM SKIP SUBTITLE AUDIO
PLAY SPEED
QUICK REPLAY
SLEEP QUICK OSD
ADVANCED
DISC REVIEW
FL DISPLAY REPEAT
SHIFT
ANGLE/PAGE
GROUP
AV SYSTEM
DVD/CD
PLAY
LIST
TV VOL TV VOL
ENTER
ENTER
1 2
6
9
4 5
7 8
CANCEL 0 510
3
TV/VIDEO
AUX
TV VOL
CH
,
TV/VIDEO,
AUX
TV VOL
AV SYSTEM
10/ENTER
SHIFT
TV
VCR
Numbered
buttons
Video cassette recorder
Changing the remote control code
7969en-p03-26.fm Page 25 Friday, December 17, 2004 12:35 PM