Panasonic SC-HT680 - Manual (Page 26)

26
RQT7969
O
th
e
r s
p
eake
r s
e
tu
p
o
p
ti
o
n
s
Other speaker setup options
∫ Attaching to a wall
You can attach all of the speakers to a wall.
1 Drive a screw (not included) into the wall.
2 Fit the speaker securely onto the screw(s) with the hole(s).
≥The wall or pillar on which the speakers are to be attached should be
capable of supporting 10 kg (22 lbs) per screw. Consult a qualified
building contractor when attaching the speakers to a wall. Improper
attachment may result in damage to the wall and speakers.
≥Use of optional speaker cables is recommended for wall-mounted
front speakers. (You can also remove the speaker cables from the
pipes supplied with this system).
∫ Fitting speaker stands
(not included)
(Except Front speakers)
Ensure the stands meet these conditions before purchasing them.
Note the diameter and length of the screws and the distance between screws as shown in the diagram.
≥The stands must be able to support over 10 kg (22 lbs).
≥The stands must be stable even if the speakers are in a high position.
30–35 mm
(1
3 / 16
q–1 3 / 8
q)
‰7.5–9.4 mm
(
19 / 64
q– 3 / 8
q)
4.0–7.0 mm
(
5 / 32
q– 9 / 32
q)
Wall or pillar
‰3.0–4.0 mm
(
1 / 8
q– 5 / 32
q)
180 mm
(7 3 / 32
z)
Surround speaker Front speaker Center speaker
In this position, the speaker will likely fall
if moved to the left or right. Move the speaker so the screw is in this position.
Speaker stand
(not included)
Plate thickness
plus 7 mm to 10 mm (plus
9 / 32
q to 13 / 32
q)
Surround speaker
e.g.
5 mm ( 3 / 16
q), pitch 0.8 mm ( 1 / 32
q)
Attach the stands to these
metal screw holes.
60 mm (2 3 / 8
q)
7969en-p03-26.fm Page 26 Friday, December 17, 2004 12:52 PM