Pentair Pressure Side Pool Cleaner Legend II - Manual (Page 10)

LEGEND® II INSTALLATION MANUAL
3. Checking RPM - (cont.)
1. Clean the Screen located inside the Wall Fitting.
A small amount of debris will significantly affect
the performance of the cleaner.
2. Clean the skimmer basket, pump basket and pool
filter.
3. If an adjustable Gate (3-way) Valve has been
installed, adjust the valve to increase water flow
to the Legend
® II.
4. If the RPM is more than 32, at the Wall Fitting,
unscrew the Pressure Relief Valve slowly until
the RPM falls between 25-32. Again, if an
adjustable gate (3-way) valve has been installed,
adjust the gate valve to decrease water flow to
the Legend
® II.
5. If you continue to have problems with either the
water flow or obtaining the specified water
pressure to operate the Legend
® II, call your
Professional Pool Dealer.
If you have any additional questions, please
contact Pentair Water Pool and Spa, Inc.,
Technical Support Department at:
1-800-831-7133, Monday through Friday.
6