Safety and maintenance – Philips AJL308 User Manual

Page 12

Advertising
background image

Safety and general
maintenance

If you do not intend to use the clock radio
for a long time, withdraw the power cord
from the wall outlet.

Place the set on a hard and flat surface so
that the system does not tilt.

Where the MAINS plug or an appliance
coupler is used as the disconnect device, the
disconnect device shall remain readily
operable.

Install the unit near the AC outlet and where
the AC power plug can be easily reached.

The apparatus shall not be exposed to drip-
ping or splashing

Do not expose the set, batteries, to humidity,
rain, sand or excessive heat caused by
heating equipment or direct sunlight.

No objects filled with liquids, such as vases,
shall be placed on the appartus.

No naked flame sources, such as lighted
candles, should be placed on the apparatus.

Do not cover the set. Adequate ventilation
with a minimum gap of 6 inches between the
ventilation holes and surrounding surfaces is
necessary to prevent heat build-up.

The mechanical parts of the set contain
self-lubricating bearings and must not be
oiled or lubricated.

To clean the set, use a soft dry cloth. Do not
use any cleaning agents containing alcohol,
ammonia, benzene or abrasives as these may
harm the housing.

Safety and maintenance

AJL308_55_CCR 2008.3.25 14:20 Page 12

Advertising