Digital tuner – Philips AJL308 User Manual

Page 7

Advertising
background image

Digital tuner

1

During the alarm call, press any button except
REPEAT ALARM /

BRIGHTNESS

CONTROL

.

is displayed.

Repeat alarm
This will repeat your alarm call at 9-minute
intervals.

1

During the alarm call, press
REPEAT ALARM /

BRIGHTNESS

CONTROL

.

flashes.

Switching off the alarm completely

1

Press repeatedly ALARM 1 or ALARM 2
until

is changed to

.

➜When alarm is deactivated,

is dispalyed.

Helpful hints:
During alarm call, if no button is pressed, alarm
call will last 30 minutes.

Tuner

Tuning to radio station

1

Press TUNER to switch on radio (FM only).

2

Press and hold

1 2 for about 2 seconds, then

release.

➜The radio automatically tunes to a station

of sufficient reception.

3

Repeat step 2 if necessary until you find the
desired station.

To tune to a weak station, press

1 2 briefly

and repeatedly until you have found optimal
reception.

Turning on/off radio

To turn off radio, press OK.To turn on radio,
press OK again.

To improve reception:
FM: Extend and adjust the pigtail for optimum

reception.

Programming radio stations
You can store up to a total of 20 FM radio
stations in the memory, manually or automati-
cally (Auto store).

Manual programming

1

Tune to your desired station (See “Tuning to
radio station”).

2

Press and hold TUNER for about 2 seconds,
then release.

➜Preset number will flash.

3

Press

34 once or more to allocate a

number from 1 to 20.

➜Preset number will flash.

4

Press TUNER again to confirm.

5

Repeat steps 1-4 to store other stations.

Note:
– You can erase a preset station by storing

another frequency in its place.

Auto store
Autostore automatically starts programming
radio stations from preset 1. Any previous
presets e.g. manually programmed will be
erased.

1

In TUNER mode, press MENU to display
tuner menu.

2

Press

4 to select “Tuner Auto Program”.

3

Press OK.

➜Available stations are programmed (FM).

After all stations are stored, the first auto-
store preset station will then automatically
play.

To listen to a preset or autostore
station
Press

34 once or more until the desired

preset station is displayed.

AJL308_55_CCR 2008.3.25 14:20 Page 7

Advertising