Printek FormsPro 4300 - Manual (Page 97)

Printer Specifications
Page I-3
Unit opens for easy access to tractors.
Automatic loading/unloading of forms.
Automatic head gap.
Paper out sensing.
Paper motion sensing.
Paper edge sensing.
Nonvolatile memory for ten form setups. Parameters for each form include: tractor path
(only in FormsPro 4503), automatic forms cutting (only if FormsCutter is installed), cpi, left
margin, right margin, lpi, form length, top margin, bottom margin, scroll distance, cut
position adjust, print position adjust, font, character impact mode, language**, slashed or
nonslashed zero, and unidirectional printing.
Obstruction free exit path (no cables in path).
COMPUTER INTERFACE
Asynchronous RS-232: 150 to 19,200 baud; Even, Odd, Ignore or No parity; 7 or 8 data bits;
1 stop bit; XON/XOFF, ETX/ACK, and Hardware handshake.
Centronics compatible Parallel.
Coaxial/Twinaxial.***
Input Buffer: 4096 (4K).
OPERATOR CONTROLS/INDICATORS
Normal Operating Mode
Indicators: LED's for Power, Online, and Fault; 1x16 character LCD for current form
selection (and paper path in FormsPro 4503), on/off line status and fault descriptions.
Controls: Online, Form Feed/Load, Form Select/Unload, Align Up, Align Down, and enter
Setup.
Setup Mode
Indicators: LED to indicate setup mode is active.
Controls: Next Function, Previous Function, Next Value, Previous Value, and Exit Setup.
Setup Features: Form menu for setting form and printing parameters, Interface menu for
setting all I/O parameters, Option menu for setting/installing option parameters, and Security
menu for disabling changes to interface, form, and option settings.