Fax only mode, All calls are received as faxes), Activating the fax only mode – Panasonic KX-FT34HK User Manual
Page 41: Setting the fax only mode ring count, Receiving faxes
– 41 –
F
a
x
/C
o
p
y
(all calls are received as faxes)
FAX ONLY mode
Activating the FAX ONLY mode
Turn on the AUTO RECEIVE mode by pressing
until the FAX indicator light turns on.
●
The display will show the following.
Display:
●
If the AUTO RECEIVE setting is set to the EXT.TAM
mode, reset it to the FAX ONLY mode (see page 46).
●
The unit will automatically answer all calls and only
receive fax documents.
●
The number of rings before a call is answered can be
changed (see below).
FAX ONLY MODE
AUTO RECEIVE
FAX
AUTO RECEIVE
ON
This setting determines the number of rings before the unit answers a call in the FAX ONLY mode.
You can choose from 1 to 4 rings.
Helpful hints:
●
To answer a call before the unit does, increase the number of rings.
●
If you have difficulty receiving faxes from machines that have an automatic transmission feature, decrease
the number of rings.
1
Press
.
Display:
2
Press
, then
.
3
Press
.
4
Press
or
to select the desired number.
5
Press
.
6
Press
.
MENU
SETUP ITEM [ ]
START/COPY/SET
RING=1
▼ ▲
START/COPY/SET
FAX RING
0
7
1.SYSTEM SET UP
MENU
1
2
3
4
5
6
7
8
9
0
Dial keypad
MENU
START/COPY/SET
Setting the FAX ONLY mode ring count
Receiving Faxes
Note:
●
If you subscribe to a Caller ID service
(KX-FT34 only), set the ring count setting
to 2 or more rings.