Receiving faxes – Panasonic KX-FT34HK User Manual
Page 49
– 49 –
F
a
x
/C
o
p
y
Setting the ring pattern detection
How the unit will answer in each receive mode
TEL mode:
You have to answer all calls manually.
If a fax calling tone (slow beep) is heard or no sound is heard, press
to receive documents.
TEL/FAX mode:
When a single bell is detected, the unit will automatically answer the call without ringing
and activate the fax function.
When a double bell is received, the unit will ring until you answer the call.
FAX ONLY mode: The unit will answer all calls automatically and activate the fax function.
EXT.TAM mode:
When a single bell is detected, the unit will automatically answer the call and activate the
fax function.
When a double bell is received;
—if it is a voice call, the external telephone answering machine will record the voice
message.
—if it is a fax call, the unit will receive documents.
START/COPY/SET
Note:
●
In the FAX ONLY mode, the unit automatically answers a single bell call after the second ring. To change
the number of rings, change the FAX ONLY mode ring count (page 41) after setting the ring pattern.
1
Press
.
Display:
2
Press
, then
.
3
Press
.
4
Press
or
to select “ON”.
●
If this feature is not required, select “OFF”.
5
Press
.
●
The unit will print an information list.
6
Press
.
MENU
SETUP ITEM [ ]
PRINTING
START/COPY/SET
MODE=ON
▼ ▲
MODE=OFF
▼ ▲
START/COPY/SET
RING DETECTION
3
1
1.SYSTEM SET UP
MENU
1
2
3
4
5
6
7
8
9
0
Dial keypad
MENU
START/COPY/SET
Receiving Faxes