Panasonic SA-XR50 EN - Manual (Page 10)

10
Step 3
RQT74
92
Settings
Change the settings to suit your equipment to the environment in which you are using it. Before making any changes,
read the descriptions of the settings, note the factory settings and ranges, and refer to the equipment’s instructions.
Multi control basic setup settings
Enter Multi control
mode. SPEAKERS 1. Select.
Main menu is displayed.
(Multi control mode menus and factory
settings á back cover)
Set the speaker combination connected to this unit.
SUBW: Subwoofer
L R: Front L/R
C: Center
S: Surround
SB: Surround Back
For the subwoofer (SUBW), select YES if you have
connected one, or NO if you have not.
LCR S SB: All speakers connected
L_R S SB: No center speaker
LCR S __: No surround back speaker
L_R S __: No center and surround back speaker
LCR _ __: No surround speaker
L_R _ __: Only front speaker
Select “SETUP 1
(BASIC SETUP)”.
D-INPUT
(Digital input)
1. Select.
Change these settings to suit the connections you
have made to the optical (OPT) and coaxial (COAX)
digital input terminals, so that the correct source is
selected when you turn [INPUT SELECTOR].
Change the settings.
IN MODE
(Input mode)
1. Select.
This unit automatically detects whether input is digital
or analogue, but you can fix the input mode.
AUTO: Automatically detects the input signal and
plays
ANALOG: Fixes the input signal to analogue and
plays
DIGITAL: Fixes the input signal to digital and plays
PCM FIX: Fixes the input signal to PCM and plays
To finish settings Note regarding PCM FIX mode
In rare cases, the unit may have trouble recognizing the digital signals on discs.
With the PCM signals on CDs, this may cause the beginning of a track to be cut off. Engage the
PCM FIX mode if this occurs.
When PCM FIX mode is on, the unit cannot process other signals. This may cause noise to be
output. Select another mode in this case.
The PCM FIX mode remains on even if you turn the unit to standby.
1. Press [MULTI CONTROL] several times
to select “EXIT”.
2. Press [INPUT SELECTOR].
MULTI CONTROL
SPEAKERS
A B
8 6.1CH DECODING
VIDEO IN AUDIO IN L R
VCR 2
PHONES
^
MULTI CONTROL INPUT SELECTOR VOLUME
DOWN UP
PUSH ENTER
Display
8
^
MULTI CONTROL
PUSH ENTER
INPUT SELECTOR
Turn on.
1
MULTI CONTROL
PUSH ENTER
INPUT SELECTOR INPUT SELECTOR
SPEAKERS
2
INPUT SELECTOR INPUT SELECTOR
Switching Entering
SETUP 1
INPUT SELECTOR INPUT SELECTOR
D- INPUT
3
MULTI CONTROL
PUSH ENTER
• To cancel
INPUT SELECTOR INPUT SELECTOR
IN MODE
EXIT
Step
3