Panasonic SA-XR50 EN - Manual (Page 19)

19
Oper
ations
RQT74
92
Audio settings
Bass synthesizer
Provides depth of bass for audio play with impact.
• When input signal is Dolby digital stereo or DTS stereo, this mode
cannot be used.
Multi-source re-master
This original feature boosts the frequencies of the higher harmonics that
are lost during recording due to compression.
When re-master is on, the current level appears.
EFFECT 1: For fast tracks (pop and rock)
EFFECT 2: For tracks with a variety of tempos (jazz)
EFFECT 3: For slow tracks (classical)
EFFECT 4: For compressed audio signals
OFF: The re-master processing is off.
Subwoofer level
You can adjust the volume of the subwoofer while listening to a source.
Select SW – – – to stop output.
The factory setting is SW 10.
• You cannot adjust the subwoofer level if DVD ANALOG 6CH is
selected.
• Sound can be distorted if you raise the volume while the subwoofer
level is high. Reduce the subwoofer level if this occurs.
Center focus
You can make the sound of the center speaker seem like it is coming
from within the television.
The center focus cannot be used in the following cases:
• When there is no center input signal.
• When the center speaker is not selected in the SPEAKERS settings.
Multi rear surround
This mode makes it seem like sound is coming from the multiple rear
surround speakers virtually when connected with surround speakers.
The multi rear surround cannot be used in the following cases:
• When there is no surround input signal.
• When the surround channel is monaural.
• When the surround speaker is not selected in the SPEAKERS
settings.
DTS FIX mode While the input source is selected
Press and hold at the same
time for 2 seconds. • To cancel, perform the same
operation again.
“AUTO” is displayed.
In rare cases, the unit may have trouble recognizing the digital signals
on discs.
With DTS, the signals may not be recognized at all. Engage the DTS
FIX mode if this occurs.
When DTS FIX mode is on, the unit cannot process other signals. This
may cause noise to be output. Turn the setting off in this case.
• When you turn the unit to standby, the DTS FIX mode is canceled.
For your reference
The bass synthesizer, center focus or multi rear surround cannot be
used in the following cases.
• When input signal is monaural, DTS 96/24, PCM with sampling
frequencies of 192, 176.4, 96 or 88.2 kHz.
• When Dolby Pro Logic Ⅱ , DTS NEO:6, SFC or multi-source re-master
is on.
The center focus or multi rear surround cannot be used in the
following case.
• When input signal is PCM or analogue stereo.
• When DVD ANALOG 6CH is selected.
When DTS FIX mode is on
• You cannot use 6.1CH DECODING mode.
DTS-ES and DTS 96/24 are played as normal DTS (i.e., there is no
output from the surround back speaker).
NAVIGATOR LIST
DISPLAY RETURN
TV VOL – TV VOL +
HELP TV/AV
DVD RECORDER
DVD/HDD
SUBWOOFER + –
q w
CENTER
FOCUS
MULTI
REAR LEVEL EFFECT
SFC
STEREO/
2CH MIX % PL
DTS
NEO:6
DIMMER
TEST
ENTER q
r
w
SUBWOOFER
CENTER
FOCUS
MULTI
REAR SPEAKERS A B
8 6.1CH DECODING
VIDEO IN AUDIO IN L R
VCR 2
PHONES
^
DTS
MULTI CONTROL INPUT SELECTOR VOLUME
DOWN UP
PUSH ENTER
BASS
SYNTHESIZER
MULTI-SOURCE
RE-MASTER
TUNE 1 6.1CH DECODING
BASS
SYNTHESIZER
BASS ON
MULTI-SOURCE
RE-MASTER
EFFECT 1
EFFECT 1, EFFECT 2, EFFECT 3,
EFFECT 4, OFF
SUBWOOFER
SW 10
---, MIN, 5, 10, 15, MAX
CENTER
FOCUS
C.FOCUS
MULTI
REAR
M.REAR
6.1CH DECODING TUNE 1 DTS FIX
• To cancel
Press [BASS SYNTHESIZER].
• To cancel
Press [CENTER FOCUS].
• To cancel
Press [MULTI REAR].