Speakers, Front, Small – Panasonic SA-XR50 EN User Manual

Page 22: Setup 2, Distance, Advanced setup, Multi control advanced setup settings, 22 oper ations, Enter multi control mode speakers, Select “setup 2 (advance setup)

Advertising
background image

22

Oper

ations

RQT74

92

Advanced setup

You can adjust the settings to match the setup environment and performance of the connected speakers.

Multi control advanced setup settings

Enter Multi
control mode

SPEAKERS

Set the size to suit your speakers.
LARGE:

For speakers that can reproduce a full
sound range, particularly the bass range
below 100 Hz.

SMALL:

For speakers that cannot adequately
reproduce the bass range. This setting is
sufficient for most speakers if you are
using a subwoofer.

NONE:

For speakers you haven’t connected
(center or surround).

For the surround back (SUR BACK) and
subwoofer (SUB-WFR), select YES if you
have connected one, or NO if you have not.

Main menu is displayed.
(Multi control mode menus
and factory settings á back
cover)

1. Select.

2. Select the

speaker.

3. Change the

setting.

Select
“SETUP 2
(ADVANCE
SETUP)”.

Switching

Entering

Change the
settings.

DISTANCE

Enter the distance of the front, center and
surround speakers from the seating
position.
By setting the distance between the
speaker’s position (except the subwoofer)
and the listeners seating position, the
sound delay time is automatically adjusted
so that sound reaches the listener at the
same time. You can select distances
between 1.0 and 10.0 m at 0.1-meter
intervals.

1. Select.

2. Select the

speaker.

3. Change the

setting.

FILTER

1. Select.

2. Change the

setting.

Change the cut-off for bass output from the
front speakers.
If you set the front speakers to “SMALL”, the
filter is set to 100 Hz. Raise the cut-off if the
bass from the front speakers is
unsatisfactory so that this bass is output
through the subwoofer.
You can raise the cut-off from 100 Hz to
either 150 Hz or 200 Hz.

To finish settings

1. Press [MULTI CONTROL]

several times to select
“EXIT”.

2. Press [INPUT SELECTOR].

SPEAKERS

A

B

8

6.1CH DECODING

VIDEO IN

AUDIO IN

L

R

VCR 2

PHONES

^

MULTI CONTROL

INPUT SELECTOR

VOLUME

DOWN

UP

PUSH ENTER

MULTI CONTROL

PUSH ENTER

INPUT SELECTOR

MULTI CONTROL

1

MULTI CONTROL

PUSH ENTER

INPUT SELECTOR

INPUT SELECTOR

SPEAKERS

INPUT SELECTOR

INPUT SELECTOR

FRONT

FRONT, CENTER,

SURROUND,

SUR BACK, SUB-WFR

INPUT SELECTOR

INPUT SELECTOR

SMALL

NONE, SMALL, LARGE

NO, YES

2

INPUT SELECTOR

INPUT SELECTOR

SETUP 2

3

• To cancel

MULTI CONTROL

PUSH ENTER

INPUT SELECTOR

INPUT SELECTOR

DISTANCE

INPUT SELECTOR

INPUT SELECTOR

FRONT

FRONT, CENTER,

SURROUND,

SUR BACK

INPUT SELECTOR

INPUT SELECTOR

3.0

m

1.0 m

10.0 m

INPUT SELECTOR

INPUT SELECTOR

FILTER

INPUT SELECTOR

INPUT SELECTOR

100

100, 150, 200

Advertising