Philips RS232 - Manual (Page 11)

8
High Definition equipment with VGA connector
Connect the VGA output of your equipment to the VGA2 connector.
Digital DVI output of your PC (DVI-D)
Connect the Digital DVI output of your PC to the DVI-D connector.
RC out connector
This connector allows you to daisy chain remote control signals to
other equipment (e.g. AV receiver, IR repeater) which have an electrical
RC in.
Note: it is not possible to daisy chain a second monitor.
Serial I/O port RS232
The RS232 connector is only to be used with the monitor as stand
alone.
This connector allows you to control the monitor via your PC (as a
replacement of the remote control).
Note: This connector can also be used for dealer service tools.
~ MAINS
RS232 DVI-D Y/C S-VHS G/Y/Y
CVBS B/Pb/Cb
R/Pr/Cr V
H
VGA 1 VGA 2 RC-OUT
VIDEO 3
(AV3)
VIDEO 2
(AV2)
VIDEO 1 (AV1)
DVI-D
~ MAINS
RS232 DVI-D Y/C S-VHS G/Y/Y
CVBS B/Pb/Cb
R/Pr/Cr V
H
VGA 1 VGA 2 RC-OUT
VIDEO 3
(AV3)
VIDEO 2
(AV2)
VIDEO 1 (AV1)
VGA 2
~ MAINS
RS232 DVI-D Y/C S-VHS G/Y/Y
CVBS B/Pb/Cb
R/Pr/Cr V
H
VGA 1 VGA 2 RC-OUT
VIDEO 3 (AV3) VIDEO 2 (AV2)
VIDEO 1
(AV1)
RS 232
~ MAINS RS232 DVI-D Y/C S-VHS G/Y/Y
CVBS B/Pb/Cb
R/Pr/Cr V
H
VGA 1 VGA 2 RC-OUT
VIDEO 3
(AV3)
VIDEO 2
(AV2)
VIDEO 1
(AV1)
RC-OUT
1024.4 en 16x24 26-06-2003 15:44 Pagina 8