Philips RS232 - Manual (Page 9)

6
Setup menu
Language
& Use the cursor down to select Language.
é Press the cursor right to enter the list of selectable
languages.
“ Use the cursor up/down to scroll through the list and to
bring up other languages which are not displayed on the
screen at present.
Note: Only with the US English language, the menu items will
be displayed with additional icons.
Power savings
This control allows you to overrule the automatic power
savings feature.
In case Power savings is switched Off, the power
always remains on until the monitor is forced to standby.
& Use the cursor down to select Power savings.
é Press the cursor left/right to select On or Off.
AV3
This control allows you to set the AV3 input to HD-
RGB,YCbCr or HD-YPbPr.When having selected Auto,
the monitor makes the selection automatically between
YCbCr, HD-YPbPr or HD-RGB.
See also p. 7, Equipment with Component Video Output
connectors.
& Use the cursor down to select AV3 .
é Press the cursor right to enter the list with options.
“ Press the cursor up/down to select one of the options.
VGA 2
This control allows you to select whether to set the
VGA 2 connector as input, output or even HD-input.
& Use the cursor down to select VGA 2 .
é Press the cursor right to enter the list with options:
VGA IN,VGA OUT or HD IN.
“ Press the cursor up/down to select one of the options.
Note: AV3 and VGA 2 will not be available in VGA loop
through mode, i.e. when a receiver box is connected to the
monitor and a VGA source is selected.
Language ‡ US English
Power savings ) English
AV3 ( Nederlands
VGA2 § Deutsch
Français
Español
Setup º
1024.4 en 16x24 26-06-2003 15:44 Pagina 6