Philips RS232 - Manual (Page 4)

1
Connect your computer
Directly to the monitor
& Connect one end of a VGA cable to the video
card of the computer and the other end to
the
VGA 1 connector at the rear side of the
monitor. Fix the connectors firmly with the
screws on the plug.
é In case of a multimedia computer, connect the
audio cable to the audio outputs of your
multimedia computer and to the audio inputs
of your external amplifier.
VGA 2: The video connector for VGA 2 can be
programmed to become an input or an output via
the Setup menu, see p. 6. The function of being
input or output is determined by the used mode. If
the monitor is used in video mode, the VGA 2
connector is VGA output. If the monitor is used in
monitor mode, the connector is VGA input or
output.
To an electronic receiver box
See the handbook of the receiver box.
& Connect one end of a VGA cable to the
video card of the computer and the other
end to the
PC/MAC IN connector at the rear
side of the receiver box. Fix the connectors
firmly with the screws on the plug.
é In case of a Multimedia computer, connect
the audio cable to the audio outputs of your
Multimedia computer and to the
AUDIO IN
R and L inputs of the receiver box. For sound
reproduction, connect your external amplifier
to the receiver box.
Note: Only use the VGA cable supplied with the
monitor.
Daisy chaining
The Loop Through facility makes it possible
to make a daisy chain with a second monitor.
Connect one end of another VGA cable to
the
VGA 2 connector at the rear side of the
monitor and the other end to the VGA 1
connector of a second monitor.
Note: The RC out jack next to the VGA 2
connector makes it possible to daisy chain remote
control signals to other equipment. This output
cannot be used to daisy chain a second monitor.
~ MAINS RS232
VGA 1 VGA 2 RC OUT
Unpacking and wall mounting instructions
For the unpacking instructions follow the
illustrated steps printed on the packaging
(outside and inside). For the wall mounting
instructions follow the illustrated steps
‘
to § printed on the separate template.
Make sure that the wall mount is being fixed
securely enough so that it meets safety
standards.The weight of the monitor (excl.
packaging) is about 35 kg.
Note: Stands are optional accessories. Consult
your dealer.
English
1024.4 en 16x24 26-06-2003 15:44 Pagina 1