Philips RS232 - Manual (Page 6)

3 3
POWER
BRIGHTNESS CONTRAST
ZOOM OUT ZOOM IN ZOOM ON/OFF
VGA AV1 AV2 AV3
MUTE
AV MUTE
q
1 2 3
4 5 6
7 8 9
0
V CH/PR
MENU OK
¬
B
VGA
press repeatedly to select
your computer connected to
the
VGA 1 or 2 connector or
to the DVI-D connector.
AV1, AV2, AV3
press to select the peripherals
connected to the connector
indicated on the monitor.
BRIGHTNESS +/-
to adjust the brightness level
of the picture
CONTRAST +/-
to adjust the contrast level of
the picture
ZOOM ON/OFF
to activate/de-activate the
zoom function.
See p. 5.
ZOOM IN/OUT
to adjust the zoom factor and
to change the magnification of
the picture when zoom is
activated. See
p. 5.
V no function (except when in
combination with a receiver box
and a Home Cinema audio
receiver)
¬ no function (except when in
combination with a receiver box
and a Home Cinema audio receiver)
CH/PR Program selection
To browse through the sources
selected.
B to switch to standby or
on again
MENU to switch the menu
on/off
cursor buttons to select your
choice and to alter a selected
adjustment.
OK to activate your choice
AV MUTE to mute the picture
or restore it (if the monitor is
used in monitor mode).
When activated a green
indicator starts blinking in front
of the monitor.
q Picture format
See Picture 2 menu, p. 5.
Press the q key to switch
between the different picture
formats.
Use of the remote control
On screen information
When the monitor is used in the monitor mode, information about the active source
(
AV1, AV2, AV3,VGA1,VGA2 or DVI-D ) and the supported video,VGA or HD-format of
the selected source is displayed on the screen together with the selected picture format
and icons informing about AV mute.
1024.4 en 16x24 26-06-2003 15:44 Pagina 3