Philips MCD300 - Manual (Page 27)

61
English
System Menu Options
➜ Stereo: Left mono sound will send output
signals to Left speaker and Right mono sound
will send output signals to Right speaker.
➜ L-Mono: Left mono sound will send output
signals to Left speaker and Right speaker.
➜
R-Mono: Right mono sound will send output
signals to Left speaker and Right speaker.
Dynamic (default: Off)
Optimise the dynamic sound output. High
volume outputs are softened, enabling you to
watch your favourite movie without disturbing
others.
➜ The levels for dynamic selection: FULL, 3/4,
1/2, 1/4 and OFF.
Note:
– DTS surround audio output is not available in
this DVD player.
3D Processing
The option included in 3D Processing is: “Reverb
Mode”.
Reverb Mode (default: Off)
Reverb mode provides a virtual surround sound
experience using just two speakers.
➜ Off, Concert, Living Room, Hall,
Bathroom, Cave, Arena and Church.
Audio Setup Page
The options included in Audio Setup page are:
“SPDIF Setup”, “Dolby Digital Setup”, “3D
Processing”, “HDCD” and “Post DRC”.
SPDIF Setup (default: SPDIF/RAW)
The options included in SPDIF (Sony/Phillips
Digital Interface Format) Setup Page are: “SPDIF
Off ”, “SPDIF/Raw” and “SPDIF/PCM”.
➜ SPDIF Off: Turns off the SPDIF output.
➜ SPDIF/Raw: If you have connected your
DIGITAL OUT (COAXIAL or OPTICAL) to a
multi-channel decoder/receiver.
➜ SPDIF/PCM: Only if your receiver is not
capable of decoding multi-channel audio.
Dolby Digital Setup
The options included in Dolby Digital Setup are:
“Dual Mono” and “Dynamic”.
Dual Mono (default: stereo)
Select the setting that matches the number of
speakers you have connected.
p038-p071_MCD300_Eng 2005.11.3, 16:34 61