Panasonic DP-2000 - Manual (Page 163)

163
T
roub
le
sh
ootin
g
Troubleshooting
Starting with:
NOTE
If the printing operation fails, check the following points first:
• Connection cables are properly connected.
• Length of connection cables is not longer than 20 ft. (6 m).
• Power of devices is turned on.
• Paper is loaded on the device properly.
• Error message is not displayed on device.
The above points can be verified by printing a test page. Refer to the following for procedures for test
page printing:
Windows 95/98/Me [General Tab] (See page 14 )
Windows NT4.0 [General Tab] (See page 29 )
Windows 2000 [General Tab] (See page 50 )
• The status of the devices can be verified by the status monitor (See page ).
17
35
58
140