Panasonic DP-2000 - Manual (Page 22)

Installation and Configuration (Windows 95/98/Me)
22
■
Handling Tab
Sorter
Select whether to Stack or Sort when printing multiple copies.
Printing on both sides (Duplex)
Select duplex printing for printing on both sides.
Note 1) Duplex Printing is allowed only when the Dual-Path Exit Guide Unit, Paper Transport Unit and
Automatic Duplex Unit (DA-FK200/FK210/MD200) are mounted.
Note 2) Check [Duplex Unit] check box in Device Options Tab.
Flipping Direction
Select binding side (Long Edge/Short Edge) for duplex printing.
Binding Margin
Select the binding margin upon duplex printing.
The width of the binding margin is specified on the main unit. (See page 30, copy section)
Output Tray
Specify the output destination. <Auto Selection, Inner Tray 1, Inner Tray 2>
Note 1) Output Tray selection is allowed only with Dual-Path Exit Guide Unit, Paper Transport Unit, Exit
Tray (Outer) or 1-Bin Finisher (DA-FK200/FK210/XT200/FS200) is installed.
Note 2) Check [Inner Tray], [Finisher / Outer Tray] check boxes in Device Options Tab.