Panasonic DP-2000 - Manual (Page 48)

Installation and Configuration (Windows NT 4.0)
48
NOTE
• Settings specified in this section are valid until an application is shut down.
• Specifying [Yes] for [Binding Margin] moves a printing area vertically or horizontally
(for ensuring binding margin). For specifying margin in consideration of a double-page
spread printing on application, specify [No] for [Binding Margin].
Output Tray
Specify the output destination.
Note 1) Output Tray selection is allowed only when the Dual-Path Exit Guide Unit, Paper Transport Unit,
Exit Tray (Outer) or 1-Bin Finisher (DA-FK200/FK210/XT200/FS200) is installed.
Note 2) Post cards cannot be output from the outer tray.
Secure Print
Select to enable Security Print.
Halftone Color Adjustment
• Contrast
Adjust the contrast of print images.
• Brightness
Adjust the brightness of print images.
• Dark Picture
Select this option in order to print dark images brighter.
• Negative
Select this option in order to print images with black and white reversed.
• Input RGB Gamma
Adjust the gamma of print images (color intensities). Red, Green and Blue can also be adjusted
individually.
• Black Ref/White Ref
Adjust the difference between the darkest and lightest colors of an image. Increasing the Black Ref
value or decreasing the White Ref value will intensify the contrast of the image but reduces the range of
colors in between.
• Picture
Select a test pattern type.
Selecting the View check box will display halftone adjustment results in the test pattern.